Why do lock buttons break

Some lock problems are serious and require the skills of a fully trained locksmith but others can be solved by following the simple guidance below. Here are 5 common lock problems and what you should do if they occur.

This is one of the most frustrating lock problems and usually occurs out of the blue without warning. By doing this, there is a good chance you will insert the broken key further into the locking mechanism making it more difficult to retrieve. If there is enough of the broken key visible, you can try inserting the tip of needle nosed pliers into the keyhole to grab the broken key and pull it straight out. At this stage you should call for the help of a trained locksmith. They will have the tools and skills to remove the key without causing further damage to the lock.

Having a broken lock system can seriously impact your security. A broken lock can make you vulnerable to threats. Door locks and security are synonymous with each other, and you should keep in mind that a faulty lock system can put you in a very dangerous position. Now that we are talking about the issue of security, a more deadly consequence of this negligence could be a burglary attempt.

Avoiding the issue of a broken lock can put you, your family and your belongings in a state of danger. The issue could have been avoided initially by installing a system of lock repair.

Locksmith Monkey is an excellent and reliable company that offers emergency locksmith services in areas around Portland. They specialize in master key systems, safes, access control and electronic keying. Not to mention their licensed, bonded and insured locksmith are there to assist expertly in lock repair, lock replacement, broken lock issues, lock installation, keyless entry and many other.

Need locksmith services in Portland? Weather Stripping as a Cause of Faulty Lock Weather stripping is one of the most common reasons for a malfunctioning door lock latch or a broken lock. Enlarge the opening by filing in the inside edges of the opening. Reposition the strike plate by unscrewing it. Then, test if the door lock latch functions properly. You can try extracting it using a pair of needle nose pliers or a strong magnet that can pull out the remaining piece.

You risk pushing the broken piece further into the lock, causing damage. So, we actually advise against this — proceed with caution! It may be possible to use a flathead screwdriver small enough to fit into the keyhole. By inserting it in the lock, you can try to lever or loosen the positioning of the key until part of it extrudes from the lock. At that point, you should be able to extract the broken piece with needle nose pliers or a strong magnet.

It may be better to call in the help of a professional locksmith. If the whole lockset is worn, it is best to replace it entirely. You can buy new door locksets online at Amazon. Exterior locks can freeze, interior locks get dirty, and small internal parts eventually wear out or break. Before you buy a replacement lock, try some quick remedies:.

Put some graphite into the keyhole, either by squeezing it from a tube or dusting it onto a key, and then operate the lock a few times to work the graphite into the mechanism. Lock de-icers contain alcohol and other lubricants that help to dissolve gummy, dirty deposits. The last resort is to disassemble the lock to see if something has jammed or is broken—you may be able to set it straight or replace the part without buying a whole new lock.

Lock de-icers are available on Amazon. They should be in line with the center of the cylinder. Tighten the setscrew s by turning clockwise—be sure they engage the slot that runs along the edge of the cylinder the key slot should be perfectly vertical. Replace the faceplate. Replace the case.